5-Port Gigabit Desktop Switch with 4-Port PoE+
- 4× gigabit PoE+ ports with up to 30 W PoE output per port*
- 40 W total PoE budget*
- Up to 250m data and power transmitting range under Extend Mode**
- Automatically reboots your dropped or unresponsive PoE-powered devices.
- Simply plug and play for instant connectivity with no configuration required.
- Fanless design reduces power consumption and ensures silent operation, ideal for noise-sensitive homes or businesses.
- Desktop / Wall-mounting
5-Port
Gigabit Desktop Switch
with 4-Port PoE+
-
40W PoE
Budget* -
Long-Range PoE+
(250 m**) -
PoE Auto
Recovery -
Intelligent Power
Management -
Desktop or
Wall-Mounting -
Plug
and Play -
Fanless Design for
Silent Operation -
Durable Metal
Casing
Power over Ethernet, Flexible Network Deployment
Compliant with the IEEE 802.3af/at PoE standards, the switch supports a total PoE power budget of 40 W with 30 W max per PoE+ port. When total power consumption exceeds 40 W, the intelligent power management will cut the lower priority ports power to protect devices from damage.
-
Access
Point -
IP
Phone -
IP
Camera -
IPTV
-
Network Video
Recorder -
Computer
Instantaneous Multi-mode Toggles△
Up to 250m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m** —perfect for IP Camera deployment in large areas.
PoE Auto Recovery
Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.
-
Up to 250m Transmissions
With extend mode, the PoE transmission distance reaches up to 250m** —perfect for IP Camera deployment in large areas.
-
PoE Auto Recovery
Recovery mode helps automatically detect and reboot PD devices, such as cameras and APs, when they fall offline or go unresponsive—all without needing manual monitoring and restarts.
Plug and Play
-
1. Connect to Power
-
2. Connect the Devices
IP Phone
IP Camera
Access Point
Internet
Router
-
3. Enjoy
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Interface | • 5× 10/100/1000Mbps RJ45 Ports• AUTO Negotiation• AUTO MDI/MDIX |
| Medios de red | • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 100BASE-TX: UTP category 5, 5e cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m)• 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)• EIA/TIA-568 100Ω STP (maximum 100m) |
| Cantidad de ventiladores | Fanless |
| Fuente de alimentación externa | External Power Adapter (Output: 53.5 VDC / 0.81 A) |
| Tasa de reenvío de paquetes | 7.44 Mpps |
| PoE Ports (RJ45) | • Standard: 802.3 af/at compliant• PoE Ports: Ports 1–4• Power Supply: 40 W |
| Tabla de direcciones Mac | 2K |
| Marco Jumbo | 16 KB |
| Capacidad de Switch | 10 Gbps |
| Dimensiones (An x Pr x Al) | 3.9×3.9×1.0 in (99.8×98×25 mm) |
| Consumo máximo de energía | • 4.12 W (220/50 Hz. no PD connected)• 47.5 W (220/50 Hz. with 40 W PD connected) |
| Disipación de calor máxima | • 14.05 BTU/h (no PD connected)• 161.98 BTU/h (with 40 W PD connected) |
| FUNCIONES DE SOFTWARE | |
|---|---|
| Características avanzadas | • Extend Mode: Ports 1–2• PoE Auto Recovery: Ports 1-4• Compatible With IEEE 802.3af/at Compliant PDs• Mac Address Auto-Learning And Auto-Aging• IEEE 802.3x Flow Control• 802.1p/DSCP QoS• IGMP Snooping |
| Método de transferencia | Store-And-Forward |
| OTROS | |
|---|---|
| Certificación | FCC, CE, RoHS |
| contenidos del paquete | • TL-SG1005LP• Power Adapter• Installation Guide |
| Ambiente | • Operating Temperature: 0–40 ℃ (32–104 ℉);• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to the power consumption of PoE-powered devices or the cable quality and type.
△Numbers after different modes represent the effective ports for that mode.