4.0psd_normal_20230601111005c.png)
-2.0_03_large_1578383312952i_normal_20230601111131d.png)
4.0psd_thumb_20230601111005m.png)
-2.0_03_large_1578383312952i_thumb_20230601111131p.png)
4.0psd_large_20230601111005u.png)
-2.0_03_large_1578383312952i_large_20230601111131z.png)
8-Port Gigabit Desktop/Rackmount Switch with 8-Port PoE+
- 8× 10/100/1000Mbps RJ45 ports.
- Equipped with 8× PoE+ supported ports to transfer data and power over a single cable.
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks.
- Innovative energy-efficient technology reduces power consumption.
- Supports PoE+ standard with total power budget of 153W* and up to 30W per port.
- Up to 250m data and power transmitting range under Extend Mode**.
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices.
- Plug and play design, no configuration required.
Dedicated 8-Port PoE+ Switch for Wide Range of Applications with 153 W PoE Budget
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 153 W PoE power budget* for the 8× PoE ports makes it has wide range of applications, such as surveillance, offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and etc.
Total 153 W Power Budget
Ideal for IP Surveillance
—Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m*—perfect for IP Camera deployment in large areas.
*The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Plug and Play
-
Plug In
-
Connect Devices
Internet
IP Phone
IP Camera
Access Point
Router
TL-SG1008MP
-
Enjoy
Power overload
153 W
Intelligent Power Management
When total power consumption exceeds 153 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Advanced Functions for Higher Performance
-
IGMP
Snooping
Traffic Optimization
for IPTVIGMP Snooping optimizes multimedia traffic delivery, to ensure a better network experience especially for applications like IPTV.
-
QoS
For Fluent Online Experience
Ensures smooth traffic for latency sensitive applications, such as voice and video.
Casos relacionados
-
TSUI WAH Restaurant
Omada Helps TSUI WAH Restaurant Provide Wi-Fi Coverage in Hong Kong
TSUI WAH Restaurant
Omada Helps TSUI WAH Restaurant Provide Wi-Fi Coverage in Hong Kong
“TP-Link Omada’s solution provides the same Wi-Fi performance at a much better price, which works within our budget much better. TP-Link Omada helps us provide much better Wi-Fi than before. This improves our service substantially and our reputation among customers.” —Mr. Ben Leung, IT Engineer of the restaurant.
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Interface | 8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX |
| Medios de red | 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) |
| Cantidad de ventiladores | 1 |
| Bloqueo de seguridad física | No |
| Fuente de alimentación | 100-240VAC, 50/60Hz |
| Tasa de reenvío de paquetes | 11.904 Mpps |
| PoE+ Ports(RJ45) | Standard: 802.3at/af compliantPoE+ Ports: 8 PortsPower Supply: 126W |
| Ancho de banda de retorno | 16Gbps |
| Tabla de direcciones Mac | 4K |
| Tamaño del búfer | 1.5Mbits |
| Marco Jumbo | 16 KB |
| Capacidad de Switch | 16Gbps |
| Dimensiones (An x Pr x Al) | 11.6*7.1*1.7 in. (294*180*44 mm) |
| Montaje | Rack Mountable |
| Consumo máximo de energía | 9.89W(220V/50Hz. no PD connected)140.67W(110V/60Hz. with 126W PD connected) |
| Disipación de calor máxima | 33.74BTU/h(no PD connected)492.56BTU/h(with 126W PD connected) |
| FUNCIONES DE SOFTWARE | |
|---|---|
| Características avanzadas | Compatible With IEEE 802.3af/at Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode |
| Método de transferencia | Store-And-Forward |
| OTROS | |
|---|---|
| Certificación | FCC, CE, RoHS |
| contenidos del paquete | TL-SG1008MP, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet |
| Ambiente | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.