1.0-2000px__normal_20230403080911f.png)
1.0-2000px__thumb_20230403080911u.png)
1.0-2000px__large_20230403080911o.png)
Smart Wire-Free Security Camera System, 4-Camera System
- 2K QHD-Now with 1.7 times more pixels than 1080p, providing clearer videos and photos.
- 180-Day Battery Life-The rechargeable and removable battery with a low-power protocol extends your usage.*
- Full-Color Night Vision-Reveal high-fidelity details and color at night with the starlight sensor.
- Smart AI Detection and Notification-Smart AI identifies people, pets, and cars, notifying users as needed.
- Wire-Free Placement-No wires means you can place the cameras almost anywhere inside or outside-whatever works for you!
- Light and Sound Alarm-Triggers sound and light as an alarm when motion is detected.
- Two-Way Audio-Enables communication through a built-in microphone and speaker.
- Flexible Storage Choices-Save recorded videos on the hub-installed microSD card† (up to 512 GB) or by using Tapo Care** cloud storage services.
- IP65 Water&Dust Resistant-Offers excellent waterproof and dustproof performance for outdoor scenarios.
Smart. Secure. Easy.
Install Anywhere with Long Battery Life
Smart Wire-Free Security Camera System
Tapo C420S4
180-Day Long Battery Life*
The rechargeable and removable battery with low power protocol can largely extend your usage time.
*Battery life of up to 180 days is based on TP-Link’s laboratory testing triggering 10-20 events per day. Actual battery life may vary based on device settings, use, and environmental factors.
Greater Aperture
Low-Power
Protocols Supported
Starlight Sensor
Removable Battery
- 2K QHD
- Full-Color Night Vision
- Starlight Sensor
2K QHD Crystal Clear View
Now with 1.7 times more pixels than 1080p, providing clearer videos and more crisp photos.
Full-Color Night Vision
Generates full-color images at night with embedded light.
Starlight Sensor
Captures high-quality images with vivid colors even in low-light conditions.
Smart AI Detection and Notification
Smart AI identifies people, pets, and vehicles, notifying users as needed.
Sound and Light Alarm
Trigger the sound and light alarm to frighten
away the unwanted visitors.
-
Set the Camera On the Table
Set your camera anywhere(Indoor / Outdoor) you want.
-
Two-Way Audio
Communicate directly with the outdoors.
-
Customizable Activity Zone
See what matters most to you.
-
Secure Local Storage
Save recorded videos on the hub-installed microSD card (Up to 512GB) or using Tapo Care cloud storage service.
-
Cloud Storage
Tapo Care supported. Enjoy your cloud storage with unlimited spaces.
-
Water & Dust Resistant - IP65
Resistant to outdoor weather-related factors.
Wire-Free Installation, Easy Setup
Set up your camera through the Tapo app within minutes.
Charging
100%
Charge the battery to 100% (LED will turn green)
Download the Tapo app
Turn on your camera
Follow the in-app guide
| CÁMARA | |
|---|---|
| Sensor de imagen | 1/3“ |
| Lente | F/NO: 1.61±10%; Focal Length: 3.18mm±5% |
| Vision nocturna | 850 nm IR LED up to 49 ft/15m |
| Ángulo de visión | 113° |
| Resolución | 2K QHD (2560 × 1440 px) |
| AUDIO | |
|---|---|
| Comunicación de audio | 2-way audio |
| Entrada y salida de audio | Built-in microphone and speaker |
| RED | |
|---|---|
| Protocolo | TCP/IP, ICMP, DNS, HTTPS, TCP, UDP |
| Seguridad Inalámbrica | WPA/WPA2-PSK |
| Wi-Fi Protocolo | IEEE 802.11b/g/n, 2.4 GHz |
| Frecuencia | 2.4 GHz |
| NOTIFICACIONES DE ACTIVIDAD | |
|---|---|
| Disparador de entrada | Motion detection, Persondetection, Pet detection, Vehicle detection. |
| Notificación de salida | Notification,Snapshot(Tapo care),Clips(Tapocare). |
| HARDWARE | |
|---|---|
| Botón | Camera Button: Reset/SYNC ButtonHub Button: Reset Button; SYNC Button |
| LED indicador | Camera Indicator LED: System LEDHub Indicator LED: System LED |
| Entrada del adaptador | Camera Adapter Input: 100-240V, 50/60HzHub Adapter Input: 100-240V, 50/60Hz, 0.3A |
| Salida del adaptador | Camera Adapter Output: 5.0V, 1.0AHub Adapter Output: 9.0V, 0.85A |
| Dimensiones (An x Pr x Al) | Camera Dimensions: 4.35 x 2.52 x 2.52in.(110.6*64.2*64.2mm)Hub Dimensions (L x W x H): 2.8 x 2.8 x 1.2 in.(71.45*71.45*31.25mm) |
| VIDEO/IMAGE | |
|---|---|
| Compresión de video | H.264 |
| Velocidad de fotogramas y resoluciones | 15/20 fps |
| Vídeo transmitido en vivo | 2K QHD |
| CONTENIDO DEL PAQUETE | |
|---|---|
| Contenido del paquete | Tapo C420 Cameras (Battery Included) - micro-USB Tapo H200 Hub USB Adapter USB Adapter Cable DC Power Adapter Mounting Screws Mounting Templates Camera Brackets Quick Start Guide RJ45 Ethernet Cable |
| AMBIENTE | |
|---|---|
| Temperatura de funcionamiento | -20℃~45℃(-4°F ~113 °F ) |
| Temperatura de almacenamiento | -20℃~60℃ (-4°F~140°F) |
| Humedad de funcionamiento | 10%~90%RH, Non-condensing |
| Humedad de almacenamiento | 5%~90%RH, Non-condensing |
*Battery life of up to 180 days is based on TP-Link’s laboratory testing triggering 10-20 events per day. Actual battery life may vary based on device settings, use, and environmental factors.
†microSD card needs to be purchased separately.
**Subscribe: https://www.tapo.com/en/tapocare/
Notes: Connect up to 4 cameras to a hub.
Battery-powered camera is not designed for continuous recording. It only records motion clips when activity is detected.