CPE220
2.4GHz 300Mbps 12dBi Outdoor CPE
- Built-in 12dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 30dBm/1000mw
- System-level optimizations for more than 13km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Learn more about Pharos Control >
Learn more about Pharos Long-Range Outdoor Wireless Broadband>
Point-to-Multi-Point Connections
TP-LINK’s 2.4GHz 300Mbps 12dBi Outdoor CPE, the CPE220 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE220 an ideal choice for both business and home users.
Enterprise Hardware
With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE220 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -40℃ (-40℉) to +70 ℃ (158℉).
Qualcomm Atheros enterprise 560MHz CPU
High power Tx and high sensitivity Rx radio front-end design
Advanced Antenna System
Built-in High Gain Dual-Polarized Antenna
Dedicated metal reflector ensures higher gain
and lower noise interference
V-Pol Co-polarization Pattern
H-Pol Co-polarization Pattern
13km+ Wireless Data Transmission
Specially designed for outdoor uses, ideal for long distance wireless data transmission over 13km+, tested in the field.
13km+
TP-LINK MAXtream TDMA Technology
As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE220 uses MAXtream TDMA Technology.
Pharos Control – Centralized Management System
CPE220 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.
PharOS
User-friendly web-based management system allows professionals to do more specific configurations.
2.4GHz 300Mbps 12dBi Outdoor CPE CPE220
Built-in 12dBi Dual-polarized
Directional Antenna
AP / Client / AP Router /
AP Client Router (WISP) operation modes
6KV Lightning Protection
Weather Proof Enclosure
15KV ESD Protection
Passive PoE Adapter
| CPE510 | CPE220 | CPE210 | |||
|---|---|---|---|---|---|
| Wireless Performance | |||||
| Wireless Speed | 5GHz 300Mbps | 2.4GHz 300Mbps | 2.4GHz 300Mbps | ||
| Transmit Power | 23dBm | 30dBm | 27dBm | ||
| Antenna | 13dBi | 12dBi | 9dBi | ||
| MIMO | √ | √ | √ | ||
| Coverage Range | 15km+ | 13km+ | 5km+ | ||
| Hardware | |||||
| Compatibility | 802.11a/n | 802.11b/g/n | 802.11b/g/n | ||
| Weatherproof Enclosure | √(IPX5) | √(IPX5) | √(IPX5) | ||
| Dual Ethernet Ports | - | √ | - | ||
| Grounding Terminal | √ | √ | √ | ||
| ESD Protection | 15kV | 15kV | 15kV | ||
| Lightning Protection | 6kV | 6kV | 6kV | ||
| Power Supply | 24V Passive PoE Adapter |
24V Passive PoE Adapter |
24V Passive PoE Adapter |
||
| Software | |||||
| Operation Modes | AP / Client / AP Client Router (WISP Client) / AP Router Mode | ||||
| Channel Bandwidth | 5/10/20/40MHz | 5/10/20/40MHz | 5/10/20/40MHz | ||
| Transmit Power Control | Stepping 1dBm | Stepping 1dBm | Stepping 1dBm | ||
| MAXtream TDMA Mode | √ | √ | √ | ||
| Throughtput Monitors | √ | √ | √ | ||
| Spectrum Analyzer | √ | √ | √ | ||
| Iperf Speed Test Tool | √ | √ | √ | ||
| Pharos Control Supported (Central Network Management Application) |
√ | √ | √ | ||
Casos relacionados
-
PTG Energy
TP-Link Reliable Network Solutions for Petrol Stations of PTG Energy
PTG Energy
TP-Link Reliable Network Solutions for Petrol Stations of PTG Energy
-
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
Peru WISP
TP-Link Helps WISP to Provide Reliable Wireless Connectivity in Peru
“The performance of CPE was better than expected, working stable even with -85 dBm of received power.” —David Grillo, Engineer, Kroton -
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
ADINET WISP in Indonesia
TP-Link Helps Local WISP Provide Long Distance Wireless Connectivity in Indonesia
“Amazing! The performance of the Pharos Wireless Broadband Solution has exceeded even our wildest expectations.” —Bagus Prakoso, Owner of ADINET
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Procesador | Qualcomm Atheros 560MHz CPU, MIPS 74Kc |
| Memoria | 64MB DDR2 RAM, 8MB Flash |
| Interface | 1 Puerto Blindado Ethernet 10/100Mbps (LAN0,Passive PoE in) 1 Puerto Blindado Ethernet 10/100Mbps 1 Terminal puesta a tierra 1 Botón Reset |
| Fuente de alimentación | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Rango de Voltaje: 16-27VDC |
| Consumo de Poder | 10.8 Watts Max Nota: Cuando se implementa utilizando PoE pasivo, la energía obtenida de la fuente de alimentación es más alta por una cierta cantidad dependiendo de la longitud del cable de conexión. |
| Dimensiones (An x Pr x Al) | 11×3.1×2.1 pulgadas (276×79×60 mm) |
| Tipo de Antena | Antena Direccional doble polarizado de 12dBi 2x2 Beam Width: 60° (H-Plane) / 30° (E-Plane) Nota: Para más detalle,dirígete a la hoja de datos |
| Protección | Protección 15KV ESD Protección contra rayos 6KV |
| Recinto | El ASA de exterior estabiliza el material plástico Certificación a prueba de agua IPX5 |
| CARACTERÍSTICAS INALÁMBRICAS | |
|---|---|
| Estándares inalámbricos | IEEE 802.11b/g/n (with Pharos MAXtream disabled) |
| Protocolo propietario | mODO TDMA (con Pharos MAXtream habilitado) |
| Velocidades inalámbricas | Hasta 300Mbps (40MHz,Dinámico) Hasta 144.4Mbps (20MHz,Dinámico) Hasta 72.2Mbps (10MHz,Dinámico) Hasta 36.1Mbps (5MHz,Dinámico) |
| Frecuencia | 2.4~2.483GHz Nota:la frecuencia disponible de operación puede variar en función de las limitaciones de los paises o regiones en las que se utiliza el dispositivo. |
| Poder de transmision | 30dBm/1000mw (Adjustable power by 1dBm) Nota: la potencia de transmisión máxima puede variar a través de diferentes canales dependiendo en las limitaciones de los países o regiones en las que se utiliza el dispositivo. |
| FUNCIONES DE SOFTWARE | |
|---|---|
| Configuraciones inalámbricas | Pharos MAXtream TDMA Technology 802.11b/g/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| Gestión | Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server |
| Herramientas de sistema | indicadores de Calidad de Señal Inálambrica: Intensidad de Señal/Ruido/Transmisión CCQ/CPU/Memoria Monitores: Rendimiento/Estaciones/Interfaces/ARP/Rutas/WAN/DHCP Analizador de Espectro Test de Velocidad Ping Traceroute |
| Optimizaciones a nivel de sistema | Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog |
| CARACTERÍSTICAS DEL ADAPTADOR POE | |
|---|---|
| Dimensiones(Al x An x Pr) | 110×57×33.5mm |
| Interfaces | 1 Jack AC con tierra 1 Puerto Blindado Ethernet 10/100Mbps/1000Mbps (Alimentación + Datos) 1 Puerto Blindado Ethernet 10/100Mbps/1000Mbps (Datos) |
| Botón | Botón de Reseteo Remoto |
| LED de estado de energía | 0~0.8A: Verde 0.8A~1.0A: Rojo |
| Aporte | 100-240VAC, 50/60Hz |
| Voltaje de entrada | 100VA~240VAC @ 50Hz~60Hz |
| Corriente de entrada | 0.8A Max @ 100VAC |
| Producción | 24VDC, 1.0A Max +4, 5pins; -7, 8pins. (Soporta hasta 60m Power over Ethernet) |
| Tensión de salida | 24VDC(+4,5pins; -7,8pins) |
| Eficiencia | >80% |
| Certificaciones | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| OTROS | |
|---|---|
| Certificación | CE, FCC, RoHS, IPX5 |
| contenidos del paquete | CPE Exterior Inalámbrico Adaptador Pasivo PoE 24V 1A Correas para Montaje en Poste Cable de corriente AC Guía de Instalación |
| Requisitos del sistema | Microsoft Windows 98SE, NT, 2000, XP, Vista™ o Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX o Linux. Nota: Se recomienda que utilices uno de los siguientes navegadores Web para una mejor experiencia: Google Chrome, Safari y Firefox. No se recomiendan los navegadores Internet Explorer |
| Ambiente | Temperatura de Funcionamiento: -40°C~70°C (-40℉~158℉) Temperatura de Almacenamiento: -40℃~70℃ (-40℉~158℉) Humedad de Funcionamiento: 10%~90% sin condensación Humedad de Almacenamiento: 5%~95% sin condensación |
*Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications along with the number of connected devices were defined according to test results under normal usage conditions. Actual wireless transmission rate, wireless coverage, and number of connected devices are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition.
*Protection against lightning and electro-static discharge may be achieved through proper product setup, grounding and cable shielding. Refer to the instruction manual and consult an IT professional to assist with setting up this product.
*Power supply distances are based on test results under normal usage conditions. Actual power supply distance will vary as a result of 1) AP status, including transmit power, connected devices and network traffic, 2) cable properties, including type and texture and 3) environmental factors, which include temperature and humidity.