5.0_R_normal_20230328093810r.png)
5.0_R_thumb_20230328093810b.png)
5.0_R_large_20230328093810r.png)
8-Port Gigabit Desktop Switch with 4-Port PoE+
- 8× 10/100/1000 Mbps RJ45 ports.
- 4× PoE+ ports transfer data and power on individual cables.
- Works with IEEE 802.3af/at compliant PDs.
- Plug and Play, no configuration and installation required.
- 802.1p/DSCP QoS enable smooth latency-sensitive traffic.
- Supports PoE power up to 30 W for each PoE port.
- Supports PoE power up to 64 W for all PoE ports*.
- Up to 250m data and power transmitting range under Extend Mode**
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
Dedicated 8-Port Switch with 4-Port PoE+ (64 W Budget) for Numerous Applications
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 64 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.
Up to 30 W on Each Port
Total 64 W Power Budget
Plug and Play, No Configuration Required
-
Plug In
-
Connect Devices
Internet
IP Phone
IP Camera
Access Point
Router
TL-SG1008P
-
Enjoy
Ideal for IP Surveillance
—Up to 250 m Transmissions
With extend mode, the PoE transmission distance reaches up to 250 m*—perfect for IP Camera deployment in large areas.
*The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Power overload
64 W
Intelligent Power Management
When total power consumption exceeds 64 W, the intelligent power management will cut the lower priority port power. This ensures the high priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.
Advanced Functions for Higher Performance
-
IGMP
Snooping
Traffic Optimization
for IPTVIGMP Snooping optimizes multimedia traffic delivery, to ensure a better network experience especially for applications like IPTV.
-
QoS
For Fluent Online Experience
Ensures smooth traffic for latency sensitive applications, such as voice and video.
Casos relacionados
-
TSUI WAH Restaurant
TP-LINK Helps TSUI WAH Restaurant Provide Wi-Fi Coverage in Hong Kong
TSUI WAH Restaurant
TP-LINK Helps TSUI WAH Restaurant Provide Wi-Fi Coverage in Hong Kong
“TP-Link’s solution provides the same Wi-Fi performance at a much better price, which works within our budget much better. TP-Link helps us provide much better Wi-Fi than before. This improves our service substantially and our reputation among customers.” —Mr. Ben Leung, IT Engineer of the restaurant.
| CARACTERÍSTICAS DE HARDWARE | |
|---|---|
| Interface | 8 puertos RJ45 a 10/100/1000Mbps Negociación automática, MDI/MDIX automático |
| Medios de red | 10BASE-T: cable UTP Categoría 3, 4, 5 (máximo 100 metros) EIA/TIA-568 100Ω STP (máximo 100 m) 100BASE-TX: cable UTP Categorías 5, 5E (máximo 100 metros) EIA/TIA-568 100Ω STP (máximo 100 m) 1000BASE-T: cable UTP Categorías 5, 5E, 6 o superior (máximo 100 metros) EIA/TIA-568 100Ω STP (máximo 100 m) |
| Cantidad de ventiladores | Sin ventilador |
| Bloqueo de seguridad física | No |
| Fuente de alimentación externa | Fuente de Alimentación Externa (Salida: 48VDC / 1.25A) |
| Tasa de reenvío de paquetes | 11.904 Mpps |
| PoE Ports (RJ45) | Estándard: 802.3 af compatible Puertos PoE: Puerto1- Puerto4 Alimentación Eléctrica: 55W |
| Ancho de banda de retorno | 16Gbps |
| Tabla de direcciones Mac | 4K |
| Marco Jumbo | 16 KB |
| Capacidad de Switch | 16 Gbps |
| Dimensiones (An x Pr x Al) | 6.7*3.9*1.1 in. (171*98*27 mm) |
| Consumo máximo de energía | 5.49W(220/50Hz. sin PD conectado) 65.24W(220/50Hz. con 55W PD conectado) |
| Disipación de calor máxima | 18.73BTU/h(sin PD conectado) 222.60BTU/h(con 55W PD conectado) |
| FUNCIONES DE SOFTWARE | |
|---|---|
| Método de transmisión | Store-And-Forward |
| Funciones avanzadas | Compatible con Dispositivos PD, según IEEE 802.3af Función de Prioridad Auto aprendizaje y auto envejecimiento de Direcciones MAC Control de Flujo EEE802.3x 802.1p/DSCP QoS |
| OTROS | |
|---|---|
| Certificación | FCC, CE, RoHS |
| contenidos del paquete | TL-SG1008P, Adaptador de corriente, Manual de Usuario |
| Consumo | 62,2 W (máx. con dispositivos PoE conectados consumiendo 55W) 5.5 W (máx. sin dispositivos PoE conectados) |
| Ambiente | Temperatura de funcionamiento: 0℃~40℃ (32℉~104℉) Temperatura de almacenamiento: -40℃~70℃ (-40℉~158℉) Humedad de funcionamiento: 10%~90% sin condensación Humedad de almacenamiento: 5%~90% sin condensación |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10Mbps. Actual transmission distance may vary from the quality of the cables.