Descarga para Festa F65
- Product Overview
- Manual
-
- Indoor&Outdoor&Wall&Extender AP(EU1_12 Languages)
- Indoor&Outdoor&Wall&Extender AP(America_4 Languages)
- Indoor&Outdoor&Wall&Extender AP(Middle-East-Africa_2 Languages)
- Indoor&Outdoor&Wall&Extender AP(EU2_16 Languages)
- Indoor&Outdoor&Wall&Extender AP(Asia-Pacific_7 Languages)
- SSH Commands Guide for EAPs
- Festa Cloud-Based Controller_User Guide
- Festa F65_V1_Installation Guide
- Festa AP_Ceiling Mount_Regulatory Compliance
- Ceiling Mount AP(EU1_12 Languages)_Installation Guide
- Ceiling Mount AP(EU2_16 Languages)_Installation Guide
- Ceiling Mount AP(Asia-Pacific_7 Languages)_Installation Guide
Setup Video
FAQs
- How to troubleshoot Festa access points in the Standalone mode
- Getting started with Festa Cloud-Based Controller
- Festa device adoption guidance
- Troubleshooting: AP goes offline abnormally
- Troubleshooting guide of common wireless issues
- Why my clients don't roam or connect to the nearest AP
- Troubleshooting for Wireless Client Cannot Access the Internet
- Unable to connect to EAP WiFi
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
¿Cómo encontrar la versión de hardware en un dispositivo TP-Link? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
Festa F65(EU)_V1_1.0.2 Build 20240428 |
Descargar | |
---|---|---|
Fecha de Publicación: 2024-07-02 | Idioma: Inglés | Tamaño del archivo: 11.72 MB |
Recommended Controller Software Version: Festa Controller v1.0.0 or above
New Features/Enhancements: 1. Added an anti-brute-force mechanism when logging in through the app 2. Improved stability
Bug Fixed: 1. Fixed the issue that the number of IPv6 addresses of clients connected to the Mesh AP was displayed incorrectly 2. Fixed the issue that the channel jumped abnormally after a radar signal was detected 3. Fixed the issue that the client could obtain the IP address of the default vlan when the MAC address authentication was not passed 4. Fixed the issue that the client could not access the web interface of the device after passing the portal authentication 5. Fixed the issue that in the dynamic VLAN + Portal authentication scenario, if the client does not authenticate for a period of time after connecting, the Portal page cannot be popped up normally |
Festa F65(EU)_V1_1.0.1 Build 20240313 |
Descargar | |
---|---|---|
Fecha de Publicación: 2024-03-27 | Idioma: Inglés | Tamaño del archivo: 11.57 MB |
Recommended Controller Software Version: Festa Controller v1.0.0 or above
Bug Fixed: 1. Fixed the bug of memory leak when using IPv6 dialup. |
Usar Firmware de Terceros en los Productos de TP-Link
TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para firmware de terceros que puedan admitir los equipamientos, ya que los mismos no garantizan el desempeño y la estabilidad del firmware de TP-Link. Los daños o mal funcionamiento del producto como resultado del uso de firmware de terceros, anulará la garantía del mismo.
Abrir el Código Fuente Para Programadores (GPL)
La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.
Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.
Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.
Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.
GPL Code
Emulators
Firmware Version |
Modo de trabajo |
Idioma |
|
---|---|---|---|
20240319 |
- |
Inglés |
Note:
1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.
2. The listed emulators might not have the latest firmware.
3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.