Descarga para OC300 V1

Setup Video

• Cómo configurar toda la red de router, switch y EAP con el controlador Omada SDN

  Este video mostrará cómo realizar una configuración completa con los productos TP-Link Omada, incluidos routers, switches y EAP. Como ejemplo, vamos a construir las redes inalámbricas y cableadas desde cero en nuestra oficina TP-Link. La configuración consta de 7 pasos: Paso 1. Iniciar sesión en el controlador Paso 2. Adoptar dispositivos Paso 3. Ver panel y menús Paso 4. Configurar WAN Paso 5. Configurar LAN y VLAN Paso 6. Configurar Wi-Fi Paso 7. Configurar ACL

  More Fold

• How to configure Omada Hardware Controller via Omada App

  This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via Omada app locally and remotely.

  More Fold

• How to configure Omada Hardware Controller via a Web Browser

  This videos shows how you to set up the Omada Hardware Controller (OC200 is used as an example) via a web browser locally and remotely.

  More Fold

• How to Choose an Omada SDN Controller

  This video will show you how to choose an Omada SDN Controller and its management interface.

  More Fold

• How to setup the Omada Hardware Controller (OC200/OC300) via web browser

  This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

  More Fold

• How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone

  This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

  More Fold

Filtro de funciones: Todos Guía de configuraciónDespues de comprarSolución de problemasRequisito de la aplicación de usuarioCuando configurasAviso de seguridadAsistencia adicionalPreguntas y respuestas sobre la explicación funcional o los parámetros de especificaciónDeclaración oficial

FAQs

• Introduction to Statistics Page and Export Data Feature on Omada Controller 11-07-20241853
• How to configure Account on Omada Controller 11-06-20241894
• Introduction to Omada 10-29-20246150
• How to eliminate Port Blocked Alert 10-28-20242769
• What should I do if I don’t want to receive Gateway detected attack alerts? 10-17-20242712
• API and Code Sample for External Portal Server (Omada Controller 5.0.15 or above) 09-20-202469059
• How to add Omada Controller via Omada App 09-20-202410977
• What should I do if Omada Hardware Controller cannot detect USB Drive? 08-02-20245152
• How to discover Omada devices via Software Controller and Hardware Controller 07-25-202410923
• What can I do when Omada Controller show offline from Omada Cloud 07-24-202410141
• Omada Cloud’s domain names 07-23-202434746
• Statement on Spring Framework RCE Vulnerability(For Omada Software Controller) 07-23-202448712
• How to convert SSL certificate format using OpenSSL(For Omada SDN Controller) 07-23-202476355
• What to do if you get an alert of “The number of logs is up to the limit” 07-23-202451811
• How to use the Recovery Mode to recover the firmware for Omada Hardware Controller 07-23-202473077
• What to do if you cannot find the page of Omada SDN Controller 07-23-202478764
• Frequently asked questions of Omada SDN solution related to upgrading and management 04-29-202277053
• How to use tools on the Omada Controller 07-08-202410344
• ¿Cómo migrar el controlador Omada con la función de migración? 02-28-202354798
• PPSK Function with Different RADIUS Servers Configuration Guide 05-30-202411154
• How to use encrypted SMTP Server on Omada SDN Controller 01-10-202450233
• Announcement on Discontinuation of Facebook Wi-Fi 12-01-202342976
• How to upgrade or downgrade the firmware of Omada Controller 11-28-202345861
• API and Code Sample for RADIUS Server with External Web Portal (Omada Controller 4.1.5 or above) 11-09-202369135
• How to get a backup file on Omada Hardware/Software/Cloud-Based Controller above V5.8 10-31-202330201
• The differences and commons of three Omada Controllers 09-08-202331308
• CLI Configuration Guide for Omada SDN Controller (v5.9.9 and above) 08-08-202345694
• How to enable Cloud Access on Omada SDN controller 07-20-202345841
• How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above) 04-23-202360658
• How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above) 04-23-202340359
• Configuration Guide on Dynamic VLAN with the VLAN Assignment function of RADIUS 04-23-202376803
• How to Configure Portal Authentication on Omada Controller 04-14-2023343432
• How to go through Set-up Wizard when Starting Omada SDN controller 02-21-202337622
• PPSK Configuration Guide 10-17-202260745
• Configuration Guide on EAP-TLS authentication for WPA-Enterprise (with FreeRADIUS) 09-27-2022109840
• How to configure Management VLAN in Omada SDN Controller (4.4.4 or above) 08-30-2022246670
• How to add an Omada Gateway to the network?(Controller 4.3.5 or below) 08-01-2022124532
• How to Configure Voucher Authentication on Omada Controller 07-20-2022262855
• ¿Cómo agregar un Omada Gateway a la red? (Controlador 4.4.3 o superior) 05-02-202280598
• ¿Cómo preconfigurar los parámetros de WAN en el controlador Omada (v5 o superior)? 04-25-202266277
• How to configure the WLAN Group function on the SDN Controller(New UI) 06-24-202242129
• How to set the PVID/VLAN ID for the second port on the EAP 06-24-202245541
• ¿Cómo deshabilitar WiFi de 5GHz para Omada EAP? 05-04-202274328
• Which ports do Omada Controller and EAP Discovery Utility use? 12-22-2021102842
• How to import your customized portal web page to Omada Controller 12-22-202145325
• How to correctly Delete All Events log on Omada Controller 12-17-202150200
• How to configure URL blacklist or whitelist using Omada Controller's URL Filtering feature 10-25-202189830
• VLAN configurations of the LAN ports on Omada Gateway in Controller mode 08-23-202182313

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
  ¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

OC300(UN)_V1_1.25.3 Build 20240620		Descargar
Fecha de Publicación: 2024-06-28	Idioma: Multi lenguaje	Tamaño del archivo: 250.89 MB
Nota de lanzamiento > Built-in Omada SDN Controller v5.14.26.23

OC300(UN)_V1_1.22.4 Build 20240304		Descargar
Fecha de Publicación: 2024-04-02	Idioma: Multi lenguaje	Tamaño del archivo: 250.09 MB
Nota de lanzamiento > Guía del usuario > Built-in Omada SDN Controller 5.13.30.20

OC300(UN)_V1_1.19.3 Build 20230906		Descargar
Fecha de Publicación: 2023-09-19	Idioma: Inglés	Tamaño del archivo: 234.00 MB
Nota de lanzamiento > Guía del usuario > Built-in Omada SDN Controller V5.12.9

OC300(UN)_V1_1.17.0 Build 20230328		Descargar
Fecha de Publicación: 2023-04-13	Idioma: Multi lenguaje	Tamaño del archivo: 208.93 MB
Nota de lanzamiento > Guía del usuario > Built-in Omada SDN Controller v5.9.32

OC300(UN)_V1_1.14.7 Build 20221206		Descargar
Fecha de Publicación: 2022-12-14	Idioma: Multi lenguaje	Tamaño del archivo: 213.33 MB
Nota de lanzamiento > Built-in Omada SDN Controller v5.7.6

OC300(UN)_V1_1.13.1 Build 20220921		Descargar
Fecha de Publicación: 2022-11-01	Idioma: Multi lenguaje	Tamaño del archivo: 190.15 MB
Nota de lanzamiento > Guía del usuario > Built-in Omada Controller v5.6.4

OC300(UN)_V1_1.12.1 Build 20220803		Descargar
Fecha de Publicación: 2022-09-01	Idioma: Multi lenguaje	Tamaño del archivo: 186.44 MB
Nota de lanzamiento > Built-in Omada Controller v5.5.7

OC300(UN)_V1_1.11.3 Build 20220715		Descargar
Fecha de Publicación: 2022-08-03	Idioma: Inglés	Tamaño del archivo: 184.11 MB
Nota de lanzamiento > Guía del usuario > Built-in Omada SDN Controller v5.4.7

OC300(UN)_V1_1.10.7_20220623		Descargar
Fecha de Publicación: 2022-07-25	Idioma: Inglés	Tamaño del archivo: 182.57 MB
Nota de lanzamiento > Built-in Omada SDN Controller v5.3.2

OC300(UN)_V1_1.8.2 Build 20220411		Descargar
Fecha de Publicación: 2022-05-17	Idioma: Inglés	Tamaño del archivo: 181.03 MB
Nota de lanzamiento > Built-in Omada SDN Controller v5.1.8

OC300(UN)_V1_1.7.1_20220112		Descargar
Fecha de Publicación: 2022-01-19	Idioma: Inglés	Tamaño del archivo: 161.72 MB
Nota de lanzamiento > Built-in Omada SDN Controller v5.0.30 If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

OC300(UN)_V1_1.2.3 Build 20210914		Descargar
Fecha de Publicación: 2021-10-26	Idioma: Inglés	Tamaño del archivo: 123MB
Nota de lanzamiento > Guía del usuario > Built-in Omada SDN Controller v4.4.6 If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

OC300(UN)_V1_1.2.2 Build 20210721		Descargar
Fecha de Publicación: 2021-09-06	Idioma: Inglés	Tamaño del archivo: 123.24MB
Nota de lanzamiento > Guía del usuario > Build-in Omada SDN Controller v4.4.4 If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

OC300(UN)_V1_1.1.0 Build 20210406		Descargar
Fecha de Publicación: 2021-04-28	Idioma: Inglés	Tamaño del archivo: 120.33MB
Nota de lanzamiento > Guía del usuario > Build-in Omada SDN Controller v4.3.5 If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

OC300(UN)_V1_1.0.4 Build 20210118		Descargar
Fecha de Publicación: 2021-03-03	Idioma: Inglés	Tamaño del archivo: 119.38MB
Guía del usuario > Built-in Omada SDN controller v4.2.11. If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1   Bug Fixed: 1. Fixed the bug that we may not be able to export the XLSX file in Settings->Services->Export Data. 2. Fixed the bug that the OC300 may get an “Invalid Controller” error in the Cloud Access function if the OC300 didn’t connect to the Internet during the Quick Setup. 3. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 4. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 5. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 6. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 7. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 8. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 9. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 10. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 11. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.   Notes:          1. For OC300 (UN) V1 Only. 2. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 3. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of the Omada Controller Upgrade Guide. 4. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.  5. This version of the controller is applied to the Omada APP of version 3.0.X or above.

OC300(UN)_V1_1.0.3_Build_20201119		Descargar
Fecha de Publicación: 2020-12-18	Idioma: Inglés	Tamaño del archivo: 118.6MB
Guía del usuario > Built-in Omada SDN controller v4.2.8. If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1   New Feature/Enhancement: 1. Support to manage TL-SL2428P(UN) 4.20. 2. Optimize the protocol for the device reporting information of rate/duplex capability. 3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password. 4. Add the batch cancelling of devices migration in the migration function. 5. Vulnerability optimization   Bug Fixed: 1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP. 2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page. 3. Fixed the bug that the user without device permission may display that it still has permission in the account settings. 4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller. 5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager. 6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller. 7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time. 8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.   Notes: 1.  For OC300(UN) V1 Only. 2.  Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 3.  If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 4.  Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.  5.  This version of the controller is applied to Omada APP of version 3.0.X or above.

OC300(UN)_V1_1.0.1 Build 20201016		Descargar
Fecha de Publicación: 2020-11-13	Idioma: Inglés	Tamaño del archivo: 118.58MB
Guía del usuario > Built-in Omada SDN controller v4.2.4. Omada SDN Controller can manage only certain devices with supported firmware. Please make sure your device is compatible with Omada SDN Controller, and follow Omada Controller Upgrade Guide to upgrade OC200.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1   New Feature/Enhancement: 1.  Support to import the SSL certificate of PFX format.  2.  Support to create of up to 1000 sites. 3.  Support arbitrary adjustment of logo display and closing logo. 4.  Support to paste the IP address for everywhere there is IP setting. 5.  Support to restore the site privilege setting for cloud users when backup and restore for the same controller. 6.  Support to print all unused voucher codes.  7.  Support to delete the archived alert log and event log. 8.  Support to export device list, client list, etc. in Export Data function.  9.   Support to drag and drop card adjust the dashboard display. 10.  Add the Hostname/IP setting which will be used for the controller URL in the notification email. 11.  Add Past Connection page in the Insight menu. 12.  Improve the MAP topology display.     Bug Fixed: 1.  Fixed the bug that the Limited Online Users voucher code still can be used after expired. 2.  Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function. 3.  Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access. 4.  Fixed the bug that the cutout logo will show a black background. 5.  Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.   Notes: 1.  For OC300(UN) V1 Only. 2.  Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 3.  If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 4.  Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below.  5.  This version of the controller is applied to Omada APP of version 3.0.X or above.

OC300(UN)_V1_1.0.0 Build 2020080		Descargar
Fecha de Publicación: 2020-11-09	Idioma: Inglés	Tamaño del archivo: 114.01MB
Guía del usuario > Bundle Omada Controller 4.1.5 If you are using the old controller(v3.2.10 or below) and planning to replace with OC300, please read the Omada Controller Upgrade Guide at first.   Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1   New Feature/Enhancement: 1. First firmware for OC300(UN)_v1. 2. Suitable for small and medium business network. 3. Omada SDN hardware controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points. 4. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.   Notes: 1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. This version of controller is applied to Omada APP of version 3.0.X or above. 3. For OC300 (UN) v1.0 only.

Usar Firmware de Terceros en los Productos de TP-Link

TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para firmware de terceros que puedan admitir los equipamientos, ya que los mismos no garantizan el desempeño y la estabilidad del firmware de TP-Link. Los daños o mal funcionamiento del producto como resultado del uso de firmware de terceros, anulará la garantía del mismo.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

GPL Code

• OC300(UN)_V1_GPL

Emulators

Firmware Version	Modo de trabajo	Idioma
Omada SDN Controller 5.0	-	Inglés	Navegar
Omada SDN Controller 4.3	-	Inglés	Navegar