Descarga para T1500G-10PS | TP-Link Uruguay

MIBs Archivos

T1500G-10PS(UN)_V2_MIB_20180330

Descargar

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño del archivo: 205.66 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202463372
How to configure STP/RSTP on L2 Managed switches using the new GUI 10-29-202481084
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024162655
How to configure LACP on our Smart/ Managed Switch 10-29-2024236065
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024174423
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462645
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024258451
How to build a Wireless Network for Chain Store using tp-link products 08-02-202465062
What is the function we can configure when the switch is managed by Omada SDN Controller? 07-23-202467876
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202485998
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202479981
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024348894
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489320
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479085
What are the differences in features and application scenarios among various serial switches? 07-01-2024230038
¿Cómo configurar Obtener tiempo del servidor NTP en el Switch inteligente - administrable de TP-Link? 07-05-2022228705
How to Setup TP-Link AP’s Multi-SSID (VLAN) to Work with TP-Link Switch 06-29-2022570104
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128286
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202282648
How to configure 802.1q VLAN on Smart Switches 06-29-2022148188
How to configure RSTP on TP-Link switches using the old GUI 06-28-2022109895
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022326681
How to configure MAC ACL on Smart/Managed switch 06-28-202284959
How to choose PoE switch 06-28-2022110328
How to change the IP address of the smart and L2 managed switches using the new GUI and CLI 06-27-2022182746
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022163910
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022110908
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202259264
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202270914
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI 06-27-202262314
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290116
Why are some functions lost after I log in to the switch? 07-20-202149202
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201860318
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133598

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1500G-10PS(UN)_V2_20200805

Descargar

Fecha de Publicación: 2020-09-22

Idioma: Inglés

Tamaño del archivo: 8.31 MB

New Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.

Notes:
1. For T1500G-10PS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.

T1500G-10PS(UN)-V2-20200109

Descargar

Fecha de Publicación: 2020-04-20

Idioma: Inglés

Tamaño del archivo: 9.15 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1500G-10PS(UN) V2.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1500G-10PS(UN)_v2_190509

Descargar

Fecha de Publicación: 2019-07-25

Idioma: Inglés

Tamaño del archivo: 8.84 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Support TLS 1.2.
3. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
4. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
5. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T1500G-10PS(UN) 2.0.
2. If your device's Hardware Version is 1.0, after upgrading to this firmware, the old configuration will be lost.

Usar Firmware de Terceros en los Productos de TP-Link

TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para firmware de terceros que puedan admitir los equipamientos, ya que los mismos no garantizan el desempeño y la estabilidad del firmware de TP-Link. Los daños o mal funcionamiento del producto como resultado del uso de firmware de terceros, anulará la garantía del mismo.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

GPL Code

T1500G-10PS(UN)_V2_GPL

Emulators

Firmware Version	Modo de trabajo	Idioma
180330	-	Inglés	Navegar

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Descarga para T1500G-10PS V2

MIBs Archivos

802.1X Cliente

FAQs

Firmware

To Upgrade

GPL Code

Emulators

Q&A

Feature Configuration Guide