Descarga para T1600G-52TS | TP-Link Uruguay

MIBs Archivos

T1600G-52TS(UN)_v4_MIB_20190321

Descargar

Fecha de Publicación: 2019-09-25

Idioma: Inglés

Tamaño del archivo: 200.17 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T1600G-52TS(UN)_V4_MIB_20180716

Descargar

Fecha de Publicación: 2019-05-13

Idioma: Inglés

Tamaño del archivo: 206.12 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

FAQs

How to configure LACP on our Smart/ Managed Switch 10-29-2024236512
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202476221
Why the firmware version does not change after upgrading in T Series switches? 08-09-202462778
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024259038
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480205
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024349676
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202489510
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479241
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022128593
How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches 06-29-202282863
How to configure 802.1q VLAN on Smart Switches 06-29-2022148412
How to limit the port rate of the incoming traffic via ACL function 06-28-202259403
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022185607
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022325740
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022327247
How to configure MAC ACL on Smart/Managed switch 06-28-202285170
How to configure the DHCP Relay in TP-Link Switch 06-27-2022256741
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111113
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290290
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159869
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133797
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201669010
How to configure Extended IP ACL 04-28-201285590

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T1600G-52TS(UN)_V4_20200918.

Descargar

Fecha de Publicación: 2021-05-21

Idioma: Inglés

Tamaño del archivo: 8.67 MB

ew Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.

Notes:
1. For T1600G-52TS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.

T1600G-52TS(UN)-V4-20200109

Descargar

Fecha de Publicación: 2020-03-27

Idioma: Inglés

Tamaño del archivo: 9.49 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1600G-52TS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-52TS(UN)_V4_20190516

Descargar

Fecha de Publicación: 2019-07-04

Idioma: Inglés

Tamaño del archivo: 9.71 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function.
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T1600G-52TS(UN) V4.0.

Usar Firmware de Terceros en los Productos de TP-Link

TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para firmware de terceros que puedan admitir los equipamientos, ya que los mismos no garantizan el desempeño y la estabilidad del firmware de TP-Link. Los daños o mal funcionamiento del producto como resultado del uso de firmware de terceros, anulará la garantía del mismo.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

GPL Code

T1600G-52TS(UN)_V4_GPL

Emulators

Firmware Version	Modo de trabajo	Idioma
180716	-	Inglés	Navegar
180716	-	Inglés	Navegar

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Descarga para T1600G-52TS V4

MIBs Archivos

802.1X Cliente

FAQs

Firmware

To Upgrade

GPL Code

Emulators

Q&A

Feature Configuration Guide