Descarga para T2500G-10TS V2

Elija la versión de hardware:

>¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?

IMPORTANTE : la disponibilidad del modelo y la versión de hardware varía según la región. Consulte su sitio web regional de TP-Link para determinar la disponibilidad del producto.

Product Overview

T2500G-10TS(UN)_V2_Datasheet

Manual

JetStream 8-Port Gigabit L2 Managed Switch with 2 SFP Slots
T2500G-10TS

MIBs Archivos

T2500G-10TS(UN)_v2_MIB_20190531

Descargar

Fecha de Publicación: 2019-09-25

Idioma: Inglés

Tamaño del archivo: 200.33 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Descargar

Fecha de Publicación: 2019-03-13

Idioma: Inglés

Tamaño del archivo: 3.10 MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202463089
How to configure STP/RSTP on L2 Managed switches using the new GUI 10-29-202480718
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202485624
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202479685
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024347730
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022363625
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022324284
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022110619
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202289827
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202159259
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018133234

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2500G-10TS(UN)_V2_20200110

Descargar

Fecha de Publicación: 2020-03-27

Idioma: Inglés

Tamaño del archivo: 9.65 MB

Modifications and Bug Fixes:
Fix the bug that CPU will reach 90% if close the telnet connection when changing the password for first logining switch through telnet.

Notes:
1. For T2500G-10TS(UN) V2.0.
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

T2500G-10TS(UN)_V2_20191122

Descargar

Fecha de Publicación: 2019-12-31

Idioma: Inglés

Tamaño del archivo: 9.65 MB

New Features/Enhancements:
1. Add L2+ features included Static Routing, ARP, DHCP Server and Ethernet OAM.
2. Add the feature that needs to change password when login for the first time.
3. Add the feature that can choose not to change the IP address when resetting the switch.
4. Add "service reset-disable" for removing reset option from Bootutil.
5. Add built-in Telnet client which allows the switch can telnet other devices.
6. Allow disabling HTTP and HTTPS for access types at the same time.
7. Optimize the password character set to support more special characters.
8. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
9. Optimized the CLI display of MVR configurations.
10. Support to display MVR members of inactive and active groups.
11. Support to view/clear mac-address table on port/VLAN.
12. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.

Notes:
1. For T2500G-10TS(UN) V2.0.
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2500G-10TS(UN)_V2_20190531

Descargar

Fecha de Publicación: 2019-07-15

Idioma: Inglés

Tamaño del archivo: 9.42 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function.
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel.
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T2500G-10TS(UN) V2.0.

Usar Firmware de Terceros en los Productos de TP-Link

TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para firmware de terceros que puedan admitir los equipamientos, ya que los mismos no garantizan el desempeño y la estabilidad del firmware de TP-Link. Los daños o mal funcionamiento del producto como resultado del uso de firmware de terceros, anulará la garantía del mismo.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

GPL Code

T2500G-10TS(UN)_V2_GPL

Emulators

Firmware Version	Modo de trabajo	Idioma
181022(UN)	-	Inglés	Navegar

Note:

1. The emulator is a virtual web GUI where you can experience the TP-Link product management panel.

2. The listed emulators might not have the latest firmware.

3. The features displayed are for reference, and their availability may depend on local regulations. For more information, please refer to the datasheet or product page.

Desde United States?

Obtenga productos, eventos y servicios para su región.

IR Otra opcion

Descarga para T2500G-10TS V2

MIBs Archivos

802.1X Cliente

Driver

FAQs

Firmware

To Upgrade

GPL Code

Emulators

Q&A

Feature Configuration Guide