Descarga para T2600G-52TS | TP-Link Uruguay

MIBs Archivos

T2600G-52TS(UN)_V3_MIB_20180202

Descargar

Fecha de Publicación: 2018-03-14

Idioma: Inglés

Tamaño del archivo: 198.78 KB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X Cliente

TP-LINK_802.1X_Client_Software

Descargar

Fecha de Publicación: 2017-09-05

Idioma: Inglés

Tamaño del archivo: 5.5MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Driver

TP-LINK_USB_Console_Driver

Descargar

Fecha de Publicación: 2019-03-13

Idioma: Inglés

Tamaño del archivo: 3.10 MB

Sistema operativo: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:

For TP-LINK switches with USB Console port

FAQs

How to configure MSTP on L2 Managed switches using the new GUI 10-29-202464246
How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 10-29-2024164897
How to configure LACP on our Smart/ Managed Switch 10-29-2024238161
How to configure DHCP Interface Relay on L2 Managed switches using the new GUI 10-29-202483068
How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 10-29-2024176236
How to Block Unknown Devices to Access the Switch by Using IP Source Guard 08-09-202476766
Why the firmware version does not change after upgrading in T Series switches? 08-09-202463273
How to configure the default gateway of the smart and managed switches using the old GUI 08-09-2024260851
What is the Console Cable and the line sequence of it? 08-02-2024130110
Troubleshooting Instruction of TP-Link switch’s SFP port 07-23-202487119
The difference between the Voice VLAN feature and Auto VOIP feature 07-23-202480880
How to configure DHCP VLAN Relay on L2 Managed switches using the new GUI 07-23-2024147136
What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024352440
Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202490033
How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202479808
How to enter the BootUtil Menu to factory reset the switch with the console cable 03-22-2024133558
¿Cómo configurar Obtener tiempo del servidor NTP en el Switch inteligente - administrable de TP-Link? 07-05-2022230149
How to access TP-Link JetStream Managed Switch via the Console port 06-29-2022368040
How to configure 802.1Q VLAN on L2 Managed switches using the old GUI 06-29-2022424704
How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser 06-29-2022129540
How to limit the port rate of the incoming traffic via ACL function 06-28-202259879
How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022186675
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches 06-28-2022327720
How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022328954
How to configure MAC ACL on Smart/Managed switch 06-28-202285865
How to configure the DHCP Relay in TP-Link Switch 06-27-2022257894
How to configure the default gateway of the smart and L2 managed switches using the new GUI 06-27-2022165815
How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI 06-27-2022111898
How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI 06-27-202259889
How to configure VLAN VPN on L2 Managed switches using the new GUI 06-27-202266864
How to configure Access Control to block users' access to the switch using the new GUI 06-27-202271726
How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI 06-27-202290887
How to manage the switch with Mac via Micro USB cable 06-24-202250239
How to achieve AAA Authentication through TACACS + server on the switch 11-22-202160631
Why are some functions lost after I log in to the switch? 07-20-202149727
How to configure MAC ACL on Smart and L2 Managed switches using the new GUI 06-06-201861024
How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018134644
The nodes that TP-Link T1600/T2600 series switch use to display the CPU and Memory utilization through SNMP 12-26-201669563
How to configure Extended IP ACL 04-28-201286337

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

T2600G-52TS(UN)_V3_20200304

Descargar

Fecha de Publicación: 2021-03-12

Idioma: Inglés

Tamaño del archivo: 11.30 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login in for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing the reset option from Bootutil.
4. Add a built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled.
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address-table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T2600G-52TS(UN) V3.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T2600G-52TS(UN)_V3_181101

Descargar

Fecha de Publicación: 2018-12-11

Idioma: Inglés

Tamaño del archivo: 10.87 MB

Modifications and Bug Fixes:
1. Enhanced the MVR function.
2. Add the CLI command of "switchport general allowed vlan all/no switchport general allowed vlan all".
3. Support EtherLike-Mib.
4. Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up interface and PPPoE IP insertion is IP mode.
5. Fix the bug that NTP server will be changed when set up only one NTP server and fail to get the time.
6. Fix the bug that cannot set up auto mode for fiber ports which in portchannel.
7. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
1. For T2600G-52TS(UN) V3.0.
2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

T2600G-52TS(UN)_V3_180202

Descargar

Fecha de Publicación: 2018-03-14

Idioma: Inglés

Tamaño del archivo: 10.86 MB

Modifications and Bug Fixes
1. Fix the problem of client's unicast DHCP Request packet will flooding when enable DHCP Server.
2. Fix the problem of using Web to add the Action first time after binding ACL rules.
3. Fix the problem of SNMP set one wrong OID of the Port Mirror may crash the switch.
4. Fix the problem of shutdown of Storm Control can't be saved.
5. Fix the problem of the configuration of Protocol VLAN binding to all ports will be lost after rebooting.

Notes
1. For T2600G-52TS(UN) V3.0

2. If your device's Hardware Version is 2.0, after upgrading to this firmware, the old configuration will be lost.

Usar Firmware de Terceros en los Productos de TP-Link

TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para firmware de terceros que puedan admitir los equipamientos, ya que los mismos no garantizan el desempeño y la estabilidad del firmware de TP-Link. Los daños o mal funcionamiento del producto como resultado del uso de firmware de terceros, anulará la garantía del mismo.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

GPL Code

T2600G-52TS_V3_GPL

Descarga para T2600G-52TS V3

MIBs Archivos

802.1X Cliente

Driver

FAQs

Firmware

To Upgrade

GPL Code

Q&A

Feature Configuration Guide