Descarga para TL-SG2210P V5

Setup Video

• Cómo configurar toda la red de router, switch y EAP con el controlador Omada SDN

  Este video mostrará cómo realizar una configuración completa con los productos TP-Link Omada, incluidos routers, switches y EAP. Como ejemplo, vamos a construir las redes inalámbricas y cableadas desde cero en nuestra oficina TP-Link. La configuración consta de 7 pasos: Paso 1. Iniciar sesión en el controlador Paso 2. Adoptar dispositivos Paso 3. Ver panel y menús Paso 4. Configurar WAN Paso 5. Configurar LAN y VLAN Paso 6. Configurar Wi-Fi Paso 7. Configurar ACL

  More Fold

• How to Adopt Omada Devices via Omada Controller

  This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).

  More Fold

• How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller

  This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.

  More Fold

• How to Monitor and Manage Devices via Omada SDN Controller

  This video will show you how to monitor and manage devices via Omada SDN Controller.

  More Fold

• How to Configure Schedules to Automate Network Control via Omada SDN Controller

  This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.

  More Fold

• How to Monitor and Manage Clients via Omada SDN Controller

  This video will show you how to monitor and manage clients via Omada SDN Controller.

  More Fold

• How to Check the Clients Signal Strength and Estimate the Actual Speed

  This video will show you how to check the client signal strength and estimate actual network speeds.

  More Fold

• How to Create User Accounts on Omada SDN Controller

  This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.

  More Fold

Filtro de funciones: Todos Guía de configuraciónSolución de problemasRequisito de la aplicación de usuarioPreguntas y respuestas sobre la explicación funcional o los parámetros de especificaciónCuando configurasAsistencia adicional

FAQs

• Omada Switch DHCP Relay Configuration Guide 09-20-202410216
• Suggested configurations for AVoIP protocols on Omada Switches 09-13-20246071
• How to configure MLD Snooping on Omada Switches 08-29-20243151
• How to configure Class of Service (CoS) through Omada Controller 08-28-20243742
• How to configure Auto-VoIP on Omada Switches via Omada Controller 08-28-20243567
• Configuration guide of DHCP Options on Omada Switch 08-20-20244927
• Troubleshooting of Layer 2 Multicast Failure 08-19-20243996
• How to configure IGMP Snooping on Omada switches for hotel IPTV scenario 08-14-202415652
• How to configure 802.1X VLAN Assignment on Omada Controller 08-05-20244551
• Recommended ACL configuration on Omada Switch for common scenarios 08-05-20246013
• What's the difference between Master Administrator, Administrator and Viewer account in Omada Controller? 07-23-202433633
• How to use the Ping tool in Omada APP 07-23-202437443
• What should I do if I cannot access the web management page of my TP-Link switch? 07-23-2024340120
• Do you still have any doubt about the effect of QoS on the Switch of TP-Link? 07-23-202487390
• Getting started without an Omada Controller 07-17-20248521
• How to configure Management VLANs for Omada Switches and APs (for SOHO scenario) 07-17-20248363
• How to configure Management VLANs for Omada Switches and APs (for Business scenario) 07-17-20248256
• How to configure 802.1Q VLAN on Omada Switches when used with a third-party router 07-11-20246289
• What should I do if my switch has no Internet access? 07-08-202417357
• What should I do if my Internet from switch is unstable? 07-08-202412978
• How to setup Switch as DHCP server on Omada Controller 07-08-2024123783
• How to configure DHCP Auto Install to let switch get configuration file and image from TFTP server 07-08-202470919
• How to build an 802.1X access authentication system using Switches on Omada Controller 07-08-2024121423
• Por qué mi dispositivo alimentado por PoE no puede funcionar correctamente cuando está conectado al Switch PoE 11-15-2021250227
• How to block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches 07-01-202477203
• What are the differences in features and application scenarios among various serial switches? 07-01-2024225511
• How to configure Optical Line Terminal (OLT) and Omada Switch with XM60A 06-29-202411648
• How to configure LAG (LACP) on Omada Switches via Omada Controller 06-27-202443393
• How to configure VLAN Interfaces and Static Routes on Omada Switches 06-27-202412066
• Troubleshooting for Voice VLAN and Auto VoIP 06-26-20248316
• Troubleshooting for 802.1X (Dot1X) Authentication Fails on Omada Switch 06-26-20249105
• Troubleshooting for RADIUS Authentication Failure 06-26-20248922
• What to do if devices in the same VLAN fail to communicate with each other when connected to TP-Link switch 06-13-20248722
• What to do if Omada Device Adoption Failure 06-03-202411037
• How to Configure LAG (LACP) on Omada Switches in Controller Mode 06-03-20241266
• Best practice to prevent network loops with Omada SDN solution 04-08-202425012
• How to configure switch as DHCP server on Standalone mode 07-07-202383907
• Using Omada controller to configure multiple SSIDs with different VLANs on TP-Link Omada EAPs and Switches to work with a non-Omada gateway(Multi-Net NAT supported) 07-07-202349299
• How to Configure Management VLAN on TP-Link Smart and Managed Switches Using the New GUI 05-18-202386644
• How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above) 04-23-202354687
• How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above) 04-23-202337297
• What is 2FA and how to use it in Omada platform 04-20-202337003
• Typical CLI Configuration Examples for TP-Link JetStream Switch 12-13-2022100884
• How to test the Jumbo Frame pass-through feature on TP-Link switches 06-28-2022181702
• How to configure RSTP on TP-Link switches using the old GUI 06-28-2022107539
• How to change the IP address of the smart and managed switches using the old GUI and CLI 06-28-2022320782
• How to configure LACP on our Smart/ Managed Switch 06-28-2022230946
• How to configure MAC ACL on Smart/Managed switch 06-28-202283026
• How to choose PoE switch 06-28-2022107914
• How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI 06-27-2022157852
• How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI 06-27-2022170648
• How to check and modify VLANs on a TP-Link JetStream switch via SNMP 06-24-202256145
• How to achieve AAA Authentication through TACACS + server on the switch 11-22-202157055
• How to configure OpenSSH 7.0(and above) to login smart and managed switches? 04-17-2018131025

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

• Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
• Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. 
  ¿Cómo encontrar la versión de hardware en un dispositivo TP-Link?
• Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
• To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
• It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
• Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

Usar Firmware de Terceros en los Productos de TP-Link

TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para firmware de terceros que puedan admitir los equipamientos, ya que los mismos no garantizan el desempeño y la estabilidad del firmware de TP-Link. Los daños o mal funcionamiento del producto como resultado del uso de firmware de terceros, anulará la garantía del mismo.

Abrir el Código Fuente Para Programadores (GPL)

La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.

Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.

Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.

Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

• 
• 

Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.

GPL Code

• TL-SG2210P(UN)_V5_GPL