How to Mount Your VIGI Pan & Tilt Camera to a Wall or Pole

Watch the video:

This article will show you how to mount your camera to the wall, and how to remove your camera from the camera base.

How to Mount Your Camera

1. Mark Position

Place the mounting template where you want the camera. For wall mounting, drill four holes through four circles on your mounting template.

2. Mount Base or Pole Mounting

Mount Base:

Affix the camera base using the screws.

For wall mounting, insert four anchors into the holes and use the self-tapping screws to affix the camera base over the anchors.
There are two ways to install your cameras by the mount base depending on your situation.

Method 1:

Method 2:

Pole Mounting:

Use the cable tie to attach and tighten your camera to the pole.

How to Uninstall Your Camera

If you mounted it on the wall

Remove the screws from the anchor. Then you can take your camera off the wall.

If you install it to a pole, remove the cable ties and you can uninstall it.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.