How to set up your DL110

Tapo DL110
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
Get started with your new smart door lock on Tapo APP. Please do the steps after you have installed your door lock. If you need to install the door lock, please refer to this FAQ: https://www.tp-link.com/support/faq/4052/
Step 1: Download the Tapo APP
Go to Google Play or App Store or scan the QR code to download the Tapo app and log in.
Step 2: Select control mode for your door lock.
The Tapo DL110 operates in two modes: Local Mode (via Bluetooth) and Remote Mode (via Wi-Fi + Internet). Local control is achieved through a Bluetooth connection, which means you can only control the lock through the Tapo APP when you are in proximity to the lock. Remote control, on the other hand, allows you to manage your lock over the internet.
Note: The default operating mode is Remote Mode. If you do not wish to manage your device over the internet, please remove the battery cover, and turn off the Wi-Fi button.
Step 3: Setup the door lock in Tapo APP.
Remote Mode setup process
Follow the APP instructions to complete the setup.
Note: The location permission is needed to find and connect to your door lock during the setup. Grant the location permission when prompted and you can disable it after the setup.
1. Tap the + button in the Tapo app, and select “Add Device”.
2. Enter Setup Mode/Reset the Door Lock.
Remove the battery cover, press and hold the reset button for 5 seconds until you hear the voice promote of “ready for setup”. Make sure that the LED status is flashing green and red now.
If you need to factory reset the door lock, please long press the reset button for at least 10 seconds.
3. Tap Next to connect your device via Bluetooth.
Make sure your door lock is in setup mode during Bluetooth connection. If you failed to connect to your device, please confirm if the LED is still in flashing red and green. If not, please reset the device and do it again.
This step takes about 30 seconds. Please be patient.
4. Connect to the Wi-Fi network.
Connect the door lock to your home Wi-Fi network and enter the password. This step only shows when you set the door lock in remote mode.
4. When the pairing is complete, give your door lock a unique name and set a location for easy identification.
5. Calibrate your lock.
Close and lock the door, then tap Start Calibrating to calibrate the lock for better performance.
6. Create a new digit code as your passcode.
Note: Please remember your passcode as it won’t show again after you set it up.
7. Register your fingerprint (Optional)
It’s recommended to use your thumb, index or middle finger to register your fingerprint. Make sure your finger doesn’t have excessive water, oil or dirt on it. Tap “Start Registration” to begin setup, or tap “Maybe later” to skip this step.
Local Mode setup process
Follow the APP instructions to complete the setup.
Note: The location permission is needed to find and connect to your door lock during the setup. Grant the location permission when prompted and you can disable it after the setup.
1. Tap the + button in the Tapo app, and select “Add Device”.
2. Enter Setup Mode/Reset the Door Lock.
Remove the battery cover, press and hold the reset button for 5 seconds until you hear the voice promote of “ready for setup”. Make sure that the LED status is flashing green and red now.
If you need to factory reset the door lock, please long press the reset button for at least 10 seconds.
3. Tap Next to connect your device via Bluetooth.
Make sure your door lock is in setup mode during Bluetooth connection. If you failed to connect to your device, please confirm if the LED is still in flashing red and green. If not, please reset the device and do it again.
This step takes about 30 seconds. Please be patient.
4. Setup the door lock locally.
Please tap “Do not set up Wi-Fi now” to use the device locally via Bluetooth. Or you can turn on the Wi-Fi button and continue with step 3.1. This step will only show when your door lock is in local mode.
4. When the pairing is complete, give your door lock a unique name and set a location for easy identification.
5. Calibrate your lock.
Close and lock the door, then tap Start Calibrating to calibrate the lock for better performance.
6. Create a new digit code as your passcode.
Note: Please remember your passcode as it won’t show again after you set it up.
7. Register your fingerprint (Optional)
It’s recommended to use your thumb, index or middle finger to register your fingerprint. Make sure your finger doesn’t have excessive water, oil or dirt on it. Tap “Start Registration” to begin setup, or tap “Maybe later” to skip this step.
Câu hỏi thường gặp này có hữu ích không?
Phản hồi của bạn giúp cải thiện trang web này.
Mối quan tâm của bạn với bài viết này là gì?
- Không hài lòng với sản phẩm
- Quá phức tạp
- Tiêu đề khó hiểu
- Không áp dụng cho tôi
- Quá mơ hồ
- Khác
Cảm ơn
Chúng tôi đánh giá cao phản hồi của bạn.
Nhấp vàođây để liên hệ với bộ phận hỗ trợ kỹ thuật của TP-Link.
Sản phẩm khuyến nghị
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
This website uses cookies to improve website navigation, analyze online activities and have the best possible user experience on our website. You can object to the use of cookies at any time. You can find more information in our privacy policy . Don’t show again
Basic Cookies
Những cookie này cần thiết để trang web hoạt động và không thể tắt trong hệ thống của bạn.
TP-Link
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-bottom, tp_popup-center, tp_popup-right-middle, tp_popup-right-bottom, tp_productCategoryType
Livechat
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
Youtube
id, VISITOR_INFO1_LIVE, LOGIN_INFO, SIDCC, SAPISID, APISID, SSID, SID, YSC, __Secure-1PSID, __Secure-1PAPISID, __Secure-1PSIDCC, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC, 1P_JAR, AEC, NID, OTZ
Analysis and Marketing Cookies
Cookie phân tích cho phép chúng tôi phân tích các hoạt động của bạn trên trang web của chúng tôi nhằm cải thiện và điều chỉnh chức năng trang web của chúng tôi.
Các cookie tiếp thị có thể được các đối tác quảng cáo của chúng tôi thiết lập thông qua trang web của chúng tôi để tạo hồ sơ về sở thích của bạn và hiển thị cho bạn các quảng cáo có liên quan trên các trang web khác.
Google Analytics & Google Tag Manager
_gid, _ga_<container-id>, _ga, _gat_gtag_<container-id>
Google Ads & DoubleClick
test_cookie, _gcl_au
Meta Pixel
_fbp
Crazy Egg
cebsp_, _ce.s, _ce.clock_data, _ce.clock_event, cebs
lidc, AnalyticsSyncHistory, UserMatchHistory, bcookie, li_sugr, ln_or