Archer A10 V1 User Guide
- About This Guide
- Chapter 1 Get to Know About Your Router
- Chapter 2 Connect the Hardware
- Chapter 3 Log In to Your Router
- Chapter 4 Set Up Internet Connection
- Chapter 5 Set Up the Router as an Access Point
- Chapter 6 TP-Link Cloud Service
- Chapter 7 Guest Network
- Chapter 8 Parental Controls
- Chapter 9 QoS
- Chapter 10 Network Security
- Chapter 11 NAT Forwarding
- Chapter 12 VPN Server
- Chapter 13 Customize Your Network Settings
- Chapter 14 Manage the Router
- FAQ
- Authentication
Chapter 1 Get to Know About Your Router
This chapter introduces what the router can do and shows its appearance.
It contains the following sections:
The TP-Link router is designed to fully meet the need of Small Office/Home Office (SOHO) networks and users demanding higher networking performance. The powerful antennas ensure continuous Wi-Fi signal to all your devices while boosting widespread coverage throughout your home, and the built-in Ethernet ports supply high-speed connection to your wired devices.
Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app.
2.1. The Front Panel
_1.0_A.png)
The router’s LEDs are located on the front with an LED On/Off button. You can check the router’s working status by following the LED Explanation table.
| LED & Button Explanation | ||
| Name | Status | Indication |
|
| On | The system has started up successfully. |
| Flashing | The system is starting up or the firmware is being upgraded. Do not disconnect or power off your router. | |
| Off | Power is off. | |
|
| On | The 2.4GHz wireless band is enabled. |
| Off | The 2.4GHz wireless band is disabled. | |
|
| On | The 5GHz wireless band is enabled. |
| Off | The 5GHz wireless band is disabled. | |
|
| Blue On | Internet service is available. |
| Orange On | The router’s Internet port is connected, but the internet service is not available. | |
| Off | The router’s Internet port is unplugged. | |
|
| On | At least one powered-on device is connected to the router’s LAN port. |
| Off | No powered-on device is connected to the router’s LAN port. | |
|
| On/Off | This light remains on for 5 minutes when a WPS connection is established, then turns off, or WPS connection failed. |
| Flashing | WPS connection is in progress. This may take up to 2 minutes. | |
|
(LED On/Off) | On/Off | Press this button to turn on or off the LED. |
(Power)
(2.4GHz Wireless)
(5GHz Wireless)
(WPS)
2.2. The Side Panel
_1.0_L3.png)
The following parts (view from left to right) are located on the side panel.
| Item | Description |
| Wi-Fi On/Off Button | Press and hold the WiFi button for about 2 seconds to turn on or off the wireless function of your router. |
| Reset Button | Press and hold this button for more than 5 seconds to reset the router to its factory default settings. |
| WPS Button | Press this button to enable the WPS function. |
2.3. The Back Panel
_2.0-B.png)
The following parts (view from left to right) are located on the back panel.
| Item | Description |
| Power Port | For connecting the router to a power socket via the provided power adapter. |
| Power On/Off Button | Press this button to power on or off the router. |
| Internet Port | For connecting to a DSL/Cable modem, or an Ethernet jack. |
| LAN Ports (1/2/3/4) | For connecting your PC or other Ethernet network devices to the router. |
| Antennas | Used for wireless operation and data transmit. Upright them for the best |