Chapter 1 Get to Know About Your Adapter
This chapter introduces what the adapter can do and shows its appearance.
This chapter contains the following sections:
TP-Link Wireless USB Adapter connects your computer to a Wi-Fi network for smooth HD video, voice streaming and online gaming.
• 256QAM support increases the 2.4 GHz data rate from 150 Mbps to 200 Mbps, 200 Mbps on the 2.4 GHz band and 433 Mbps on the 5 GHz band, ensure you fully enjoy fast AC Wi-Fi
• A 5dBi high-gain antenna greatly enhances the reception and transmission signal strength of the USB adapter
• Utilizes 802.11ac standard and is backward compatible with 802.11a/b/g/n
• Supports 64/128 bit WEP, WPA-PSK/WPA2-PSK
• Supports Windows and Mac
You can check the adapter’s working status by following the LED Explanation table.
Status | Indication |
Off | The driver is not installed. The adapter is not detected. |
On | The driver has been installed successfully. |
If the LED is off, try these troubleshooting tips:
1.Check if the adapter is recognized and enabled or not. Refer to Troubleshooting-T2 for detailed instructions.
2.Remove and reinsert the adapter.
3.Reinstall the software, if necessary.
Thank you for your feedback.
Sorry, something went wrong!