1. On the Kasa app Home page, click device card to enter the device page.
2. Choose Schedule, then tap the + icon on the upper right corner to add a new schedule.
3. Choose either a Custom Time, Sunrise, or Sunset time. When choosing Sunrise or Sunset, you can also set an offset time. The time of Sunrise and Sunset will be synchronized according to regional realities.
4. Set the Repeat times within a week.
5. Click Save. After creating schedules, you can always enable or disable them manually

To set up a schedule for multiple devices at once, please refer to the following steps.

Note: This method utilizes automation, which requires the smart device to be connected to the internet to operate.

1. Open Kasa App, go to Smart -> Click the ‘+’ icon on the top right corner -> Choose Smart Actions.
2. Tap Add Trigger -> choose Trigger Time.

3. Now you can start to set the scheduled time, then click Done.

• Choose either a Custom Time, Sunrise, or Sunset time. When choosing Sunrise or Sunset, you can also set an offset time.

*Tip: The time of Sunrise and Sunset will be synchronized according to regional realities. Tap Me -> Settings -> Location and Time to sync the correct time.

• Set the Repeat times within a week and Tap Done.

4. Next, click “Add Action” to choose what smart devices you would like to control by the above time settings. choose “Control Smart Devices”. There are two methods to add multiple devices to a schedule.

Method one. Select a smart device, set it to be turned on/off, then add it to the action list. Repeat the process, adding the devices you want to turn on/off via the schedule to the action list one by one.

Here you can control different devices to turn on/off separately with the same schedule, e.g. while turning on plug KP405, turn off plug KP115 at 06:00.

Method Two. Create a group for your scheduled devices and add the group as an Action.

1. Go to the Home page, tap the ‘+’ icon on the top right corner to Add Group.

How to Add A Group for Your Tapo Devices

2. Then add this group to the action list: choose Control Smart Devices, locate the Group section in the list, and choose a group.

1. On the Kasa app Home page, click device card to enter the device page.
2. Choose Schedule, then tap the + icon on the upper right corner to add a new schedule.
3. Choose either a Custom Time, Sunrise, or Sunset time. When choosing Sunrise or Sunset, you can also set an offset time. The time of Sunrise and Sunset will be synchronized according to regional realities.
4. Tap Fade to set the Fade Rate to fade in/out your lights in a period of time you want.
5. Set the Repeat times within a week.

Refer to this instruction to enable the Auto-Off Timer: How to use the Auto-Off feature in Kasa app

1. Open Kasa App, go to Smart -> Click the ‘+’ icon on the top right corner -> Choose Smart Actions.
2. Tap Add Trigger -> choose Trigger Time.

3. Choose the same smart plug as both the Trigger and Action device, with different ON/OFF operations.

For example, set ‘Turn on KP105’ as a trigger and ‘Turn off KP105’ as an action.

4. Use Delay Action to set auto-off time. Then click Save.

In this example, KP105 will be turned off automatically after 10 minutes each time it is turned on.