Download for TD-8810 V4

Please choose hardware version:

>How to find the hardware version on a TP-Link device

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8)
Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
Vx.30=Vx.32 (eg:V3.30=V3.32)

Utility

ADSL Router Utility 060824

Download

Published Date: 2006-08-24

Language: English

File Size: 55.695 KB

Operating System: Win9x/Me/NT/2000/XP

Notes:

for ADSL Router

FAQs

What can I do if I forget the administrator password of my xDSL modem router? 08-09-20243358798
What are the most frequent asked questions about the TP-Link devices' speed? 02-21-2023859232
How Do I Log into the Web-based Utility (Management Page) of TP-Link DSL Modem & Router? 06-29-20221781504
How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 to work with IPoA or Static IP 06-29-202256518
How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 V4 to work with IPoE or Dynamic IP 06-29-202293955
How to reset TP-Link products to factory defaults 06-13-20222106374
How to connect/install TP-Link DSL router into your network (Wired network connection) 03-24-2022479184
Why cannot log into the Management Page with NOD 32 ESET? 03-21-2022174376
How to change the LAN IP address of TP-Link DSL router 09-27-2019258447
How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 V4 to work with PPPoE? 05-24-2016784808
How to install TD-W8950N(D) , TD-W8960N(D/B), TD-8810/8840, TD-W8910G/8920G, TD-W8968 V3 V4 to work with PPPoA? 05-24-201698160
How to configure the access control (ACL) on TP-Link DSL router 05-23-2016101948

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty.
How to find the hardware version on a TP-Link device
Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

TD-8810A_V4_091210

Download

Published Date: 2010-03-16

Language: English

File Size: 1.708 MB

Modifications and Bug Fixes:

Improve downstream rate.
Fix some DHCP bugs.
Fix a bug that UPnP function will not enabled after PPP dial-up.
Fix a bug that Dynamic IP can´t be used when work at PPP mode.
Fix a bug that DNS and gateway will not be cleared after disconnect if work at MER mode.
Fix a bug that virtual server can be accessed from WAN side if the service port is 80.
Fix a problem that IPTV service will not re-connect after PPP down.
Modify web UI.

Notes:

For TD-8810 V1~V4

TD-8810_080429_for Australia only

Download

Published Date: 2008-04-29

Language: English

File Size: 1.847 MB

Modifications and Bug Fixes:

Keep only one PPPoE connection (VPI/VCI: 8/35) in WAN port;
Dial on demand feature is disabled by default;
DHCP pool is set from 192.168.1.100 to 192.168.1.200;
Fixed some port forwarding bugs caused the user can´t access the internal web server with WAN IP address or LAN IP address;
Fixed a bug caused the user can´t use IP address x.x.0.x as DMZ address.

Notes:

This version is based on firmware TD-8810 080130 and modified for Australia market only.

TD-8810_080130

Download

Published Date: 2008-01-28

Language: English

File Size: 1.846 MB

Modifications and Bug Fixes:

Quick Setup menu will always appear;
Modified some function of Quick Setup.

Notes:

For TD-8810 V1~V4

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.